Recent content by eunderkoffler

Ok, here is the issue I'm having and my current configs of my tunnels: HUB interface Tunnel1 description - HUB bandwidth 100000 ip address 172.20.0.1 255.255.255.240 no ip redirects ip mtu 1480 ip nhrp authentication DMVPN123 ip nhrp map multicast dynamic ip nhrp network-id 123 ip tcp...

Server Version 04.04.04 Switch Type SL100 Platform Type TRP 1002rp Switch Connectivity T1-SMDI Number of Channels 96 Number of Voice Channels 32 Number of Fax Channels 0 Number of Speech Recognition Channels 0 Number of DSP Ports 12 Number of Mailboxes 2500 1028 Number of Fax...

And also, how do you do an Audit? Never had to do one before.

Is there a way to see what % of hard drive space that VMs are using?

We currently got two critical errors but I'm not sure what they mean nor how to go about fixing them. I looked at the hard drive spaces and all looks ok with that. Here are the following errors: 40241 Alarm Set Critical Multimedia Volume [1,] Multimedia volume is 96 percent full (loc=87)...

We currently have two signaling servers, which load balance and one lost connection the other day for a couple of minutes. Not really sure why. Has anyone else seen this? Thanks [0000] 13/04/2010 08:44:19 LOG0004 tRUDPSS: Forwarding for connect Id = 414763108, error of type = 6 (connection...

Found the problem. It was an ACL that was causing this. It works not. Thanks.

That does not correct the problem. Do you think you have to have a Nortel USB headset in order for it to work? I don't get it why it will not work with other VOIP phones connected to the same CS1000. Our CS1000 is then connected to a SL100 and they all work fine with the voice in both directions.

Is there anything special you have to setup in the cs1000 in order for this to work?

We can't ping the sets because we are blocking ping requests. Yes, I can ping the default gateway that the phones are on.

OK, here is a weird issues that I'm having. Today I installed the .exe i2050 from Nortel's site. I'm assuming that is a full version for 2 days because it is saying it will expire on Friday. The issue that I'm having is when I call other VOIP phones on the CS1000. I can hear the other party...

B315-3550-BM#sh int fa0/12 FastEthernet0/12 is up, line protocol is up (connected) Hardware is Fast Ethernet, address is 0011.932b.ca0c (bia 0011.932b.ca0c) Description: Roxann Showers - VOIP MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255...

How do you go about setting this up? Thanks

Here is the funny thing: We used to have meridian mail, but we all now have CallPilot. The other thing is that it only happens when people with VOIP (CS1000) call this particular number. We currently have about 150 users using VOIP. (CS1000) It is only happening to this one number. The rest...

This would be for a mailbox..