Recent content by andyjreed

4012885

Finally got my IPO system up and running. When I inherited it, there was a dongle in the box. Had to default the system, so I have no idea what license the dongle was for. Can someone look it up for me?

I'm actually using a Mac to setup an IP Office right now. I just got a cheap $150 dollar refurb Dell and put it in the closet with the IPO equipment. I just use Microsoft's remote desktop client for Mac OS to log in.

Is this what I'm looking for? http://support.avaya.com/css/appmanager/public/support/Downloads/P0160/2.1.x/C200971915339752082

Link doesn't work, tried it yesterday. Anyone know where I can download 2.1?

I acquired a 403 control unit. System monitor says software version is 1.1. Clearly, I need to upgrade! I was able to determine that DHCP is off and that the IP of the control unit is the default 192.168.42.1. Set the PC to 192.168.42.2. Installed the earliest release of the admin CD I could...

I've got a small lab setup in a dorm room, with a 1760 serving as my gateway. I've got 2 FXO ports on it. One of these ports is connected to a MagicJack, which simply requires plain old 10 digit dialing. The other, though, is behind a PBX, so it requires 9+10 digit dialing. Right now, I have 2...

I recently moved back to St. Louis after spending a few years in rural Indiana. It's almost all 9 here....but in Indiana, a LOT of businesses were using 7. I suppose the theory was that 8 is (sort of)traditionally access to long distance trunks.

Thanks, worked like a charm.

Ohhhh..... So basically, it's the same setup as if I were setting up POTS lines for use with CUCME, but the router also needs to be set up as a H.323 gateway, and then point the CUCM server to the gateway?

This one hasn't been answered, and I actually have the same question too...

I'm sure I'm missing something here, but I can't figure it out. Trying to create users on Unity Connection in a CUCM 7 business edition integration. On the Unity side, the add user link is missing from the users page. Is there some configuration I'm missing that isn't allowing me to add...

Trying to allow phones on me CME system internet access. Have my 1760 and catalyst switch configured for 3 vlans's: voice, data, and management. Using a PC with Internet Sharing turned on and plugged into the switch, how can I allow my phones internet access?

This makes sense, and I'll test it to see what happens. I'm actually wondering if the supervision problem might be a problem on the CO side. Way back there was an old Vodavi Starplus system on these lines. Same thing...if the phone ahead of the system answered, the system phones continued to...

I'll try that. No, they are not GS truks...and that's not a possibility, as the analog device ahead of the system would not be able to make outgoing calls. Why is the Meridian even designed to ringback on plain old COT trunks? T1/PRI, etc sure, even analog tie trunks.....but POTS??