Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
x8 E&M setting
- Thread starter wanyin
- Start date
Not familiar with the 2x8 system - but if I recall correctly, the 9006 (which the card looks like it's for) has all the T1 E&M options, such as Wink, Immediate, Delay, etc. You could just flip the transmit/receive pair between the 2 systems, and set one to supply clocking, other to clock off of it. Sorry at the moment I don't have documentation, I find any notes, I will post them.
Why does the diagram show voltage? The 2 pairs should be transmit and receive. I think it's the BCSU command in the 9006 that set the options (wink, immediate, etc.) Might be CHA-BCSU, TMD (TBL would be the card type). Sorry I can just go by memory, I don't have much trunk documentation.
Similar threads
