Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

WP91153 L2/L3 Replacement with L4A OK?

Status
Not open for further replies.

pbxports

Vendor
Jan 25, 2013
5
GB
We have a client that has asked us to replace thier WP91153 Power Supply
The system where the power supply is to be replaced has got two single carrier cabinets (SCC)
The control cabinet has the L2 version and the port cabinet has the L3 version which is the one we have to replace.

My question is can i repalce this unit with a WP91153 L4A-25 as we have one of these in stock.
As far as i can tell you can upgrade these power supplies but not downgrade so should be ok?





 
SCC cabinets that came with a 1217A power supply. These units have a
design flaw. They require that the breaker be reset to restore power if there is
any power fluctuation at all. Check your carrier power, if 1217A change them
out. Go to a 1217B or the older WP91153 L3.

1B - WP91153 L3A

1217A xxxxxxxxx DEFINITY POWER SUPPLY SCC CABINET 1217A replaces all of the
WP91153 L3, WP91153 L3A, WP91153 L4-25, WP91153 L4A-25

1217A-R AVAYA DEFINITY POWER SUPPLY SCC CABINET 1217A REFURBISHED
or
1217B-R AVAYA DEFINITY POWER SUPPLY W/LEDS SCC CABINET 1217B REFURB


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top