Windows Server as SNTP Server for IPO

[VoIPP]

Windows Domain Controllers are time servers but I don't think you can get time from them for the IPO.

Is that correct?

 

[tlpeter]

No.

BAZINGA!

I'm not insane, my mother had me tested!

 

[Bas1234]

If you can do a NET TIME \\x.x.x.x to the server and if you get a time like below then it should work.

C:\Users\<xxxx>NET TIME \\x.x.x.x
Current time at \\localhost is 10-12-2013 21:12:06

The command completed successfully.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________

 

[amriddle01]

I use Softperfect Network Scanner to reveal any NTP servers on a network (and for other things ;-)), but Yes if the server is an NTP server the system will takes it's time from it

 

[intrigrant]

Usually one of these act as a timeserver:
Default gateway
DHCP server
DNS server
Or pick a timeserver from the local provider like ntp.skynet.be or ntp.xs4all.nl or whatever provider you have ( it must be a professional provider of course to have its own NTP service )

 

[louis1965]

Hi All,

So i've follwed he steps above

Checked "net time" on my server, and i get the correct response.
set my IPO time server add to the server in question
checked system status, and i can ping the server ip from SSA through lan 1

Yet my polling in ssa fails.

any ideas's