Hello,
First time poster, long time reader.
I have a problem with my usb card reader showing up with win98.
I will try to explain it the best that I can.
System-
Compaq Presario 1610 laptop running 98SE
Intel Pentium, MMX
64MB RAM, 4GB HD
Here is my problem;
No matter how it is installed, it will not show up in "My Computer" as a drive or otherwise.
The card reader is Memorex and it came with software for 98SE.
If I run the cd setup, windows still runs the add harware wizard when reader is plugged in.
I have tried cancelling the wizard and not cancelling...either way, it wont show up.
I have tried not running the CD and just letting windows load drivers with the same result.I have tried the "Generic USB card reader driver", Nusb31e.exe, which I found online.
Same result.
In Device Manager, the reader will show up under disk drives, storage disk, and universal serial bus controllers(as usb mass storage device).
There are never any conflicts or "?" on the devices, always "device is working properly".
Why wont it show up as a drive in "My Computer" that I can actually use?
I'm fairly savvy when it comes to windows os' and can usually sort things out on my own, but this time I am at a loss.
Please help!
Thanks in advance and sorry for the rant
First time poster, long time reader.
I have a problem with my usb card reader showing up with win98.
I will try to explain it the best that I can.
System-
Compaq Presario 1610 laptop running 98SE
Intel Pentium, MMX
64MB RAM, 4GB HD
Here is my problem;
No matter how it is installed, it will not show up in "My Computer" as a drive or otherwise.
The card reader is Memorex and it came with software for 98SE.
If I run the cd setup, windows still runs the add harware wizard when reader is plugged in.
I have tried cancelling the wizard and not cancelling...either way, it wont show up.
I have tried not running the CD and just letting windows load drivers with the same result.I have tried the "Generic USB card reader driver", Nusb31e.exe, which I found online.
Same result.
In Device Manager, the reader will show up under disk drives, storage disk, and universal serial bus controllers(as usb mass storage device).
There are never any conflicts or "?" on the devices, always "device is working properly".
Why wont it show up as a drive in "My Computer" that I can actually use?
I'm fairly savvy when it comes to windows os' and can usually sort things out on my own, but this time I am at a loss.
Please help!
Thanks in advance and sorry for the rant