AS5300????????????
1 ???????
//First problem,can't start IOS correctly
System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
AS5300 platform with 131072 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x24effc
Self decompressing the image : #################### [OK]
%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
program load complete, entry point: 0x80008000, size: 0x24effc
Self decompressing the image : ############
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 5300 Software (C5300-BOOT-M), Version 12.3(17a), RELEASE SOFTWARE (fc2)
Technical Support: Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Mon 12-Dec-05 16:04 by evmiller
Image text-base: 0x60008AEC, data-base: 0x6042E000
cisco AS5300 (R4K) processor (revision A.32) with 131072K/16384K bytes of memory
.
Processor board ID 27904430
R4700 CPU at 150MHz, Implementation 33, Rev 1.0, 512KB L2 Cache
X.25 software, Version 3.0.0.
Backplane revision 2
Manufacture Cookie
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x30,
Board Hardware Version 3.2, Item Number 800-2544-04,
Board Revision C32, Serial Number 28682536,
PLD/ISP Version 0.0, Manufacture Date 13-Nov-2002.
// ????????????????????IOS?????
1 Ethernet/IEEE 802.3 interface(s)
1 FastEthernet/IEEE 802.3 interface(s)
4 Serial network interface(s)
128K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
8192K bytes of processor board Boot flash (Read/Write)
Press RETURN to get started!
*Jan 17 08:35:21.275: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
*Jan 17 08:35:21.483: %SYS-5-CONFIG_I: Configured from memory by console
*Jan 17 08:35:21.483: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 5300 Software (C5300-BOOT-M), Version 12.3(17a), RELEASE SOFTWARE (fc2)
Technical Support: Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Mon 12-Dec-05 16:04 by evmiller
*Jan 17 08:35:22.275: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed state to down
*Jan 17 08:35:22.431: %LINK-5-CHANGED: Interface FastEthernet0, changed state to
administratively down
*Jan 17 08:35:22.439: %LINK-5-CHANGED: Interface Serial0, changed state to admin
istratively down
*Jan 17 08:35:22.443: %LINK-5-CHANGED: Interface Serial1, changed state to admin
istratively down
*Jan 17 08:35:22.447: %LINK-5-CHANGED: Interface Serial2, changed state to admin
istratively down
*Jan 17 08:35:22.451: %LINK-5-CHANGED: Interface Serial3, changed state to admin
istratively down
*Jan 17 08:35:23.431: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down //???????????????
*Jan 17 08:35:23.439: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, c
hanged state to down
*Jan 17 08:35:23.443: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, c
hanged state to down
*Jan 17 08:35:23.447: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2, c
hanged state to down
*Jan 17 08:35:23.451: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3, c
hanged state to down
*Jan 17 08:35:25.447: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed state to up-
// ??????????????????
// The router stop here ,it can't go ahead anyway.
2 ??rommon>?????????
// Secondly,when entered the IOS by Ctrl-Break within 60s from begining,I can see rommon> ,but if I press any key,the mouse jump to the next row ,as showed bellow:
System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
AS5300 platform with 131072 Kbytes of main memory
monitor: command "boot" aborted due to user interrupt
rommon 1 >
//???????????Ctrl-Break???????????????????????????????rommon>???????????????????????????????????
rommon 1 > #
rommon 1 > '
rommon 1 > H
rommon 1 > H
rommon 1 >
rommon 1 >
1 ???????
//First problem,can't start IOS correctly
System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
AS5300 platform with 131072 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x24effc
Self decompressing the image : #################### [OK]
%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
program load complete, entry point: 0x80008000, size: 0x24effc
Self decompressing the image : ############
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 5300 Software (C5300-BOOT-M), Version 12.3(17a), RELEASE SOFTWARE (fc2)
Technical Support: Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Mon 12-Dec-05 16:04 by evmiller
Image text-base: 0x60008AEC, data-base: 0x6042E000
cisco AS5300 (R4K) processor (revision A.32) with 131072K/16384K bytes of memory
.
Processor board ID 27904430
R4700 CPU at 150MHz, Implementation 33, Rev 1.0, 512KB L2 Cache
X.25 software, Version 3.0.0.
Backplane revision 2
Manufacture Cookie
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x30,
Board Hardware Version 3.2, Item Number 800-2544-04,
Board Revision C32, Serial Number 28682536,
PLD/ISP Version 0.0, Manufacture Date 13-Nov-2002.
// ????????????????????IOS?????
1 Ethernet/IEEE 802.3 interface(s)
1 FastEthernet/IEEE 802.3 interface(s)
4 Serial network interface(s)
128K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
8192K bytes of processor board Boot flash (Read/Write)
Press RETURN to get started!
*Jan 17 08:35:21.275: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
*Jan 17 08:35:21.483: %SYS-5-CONFIG_I: Configured from memory by console
*Jan 17 08:35:21.483: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 5300 Software (C5300-BOOT-M), Version 12.3(17a), RELEASE SOFTWARE (fc2)
Technical Support: Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Mon 12-Dec-05 16:04 by evmiller
*Jan 17 08:35:22.275: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed state to down
*Jan 17 08:35:22.431: %LINK-5-CHANGED: Interface FastEthernet0, changed state to
administratively down
*Jan 17 08:35:22.439: %LINK-5-CHANGED: Interface Serial0, changed state to admin
istratively down
*Jan 17 08:35:22.443: %LINK-5-CHANGED: Interface Serial1, changed state to admin
istratively down
*Jan 17 08:35:22.447: %LINK-5-CHANGED: Interface Serial2, changed state to admin
istratively down
*Jan 17 08:35:22.451: %LINK-5-CHANGED: Interface Serial3, changed state to admin
istratively down
*Jan 17 08:35:23.431: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down //???????????????
*Jan 17 08:35:23.439: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, c
hanged state to down
*Jan 17 08:35:23.443: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, c
hanged state to down
*Jan 17 08:35:23.447: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2, c
hanged state to down
*Jan 17 08:35:23.451: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3, c
hanged state to down
*Jan 17 08:35:25.447: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed state to up-
// ??????????????????
// The router stop here ,it can't go ahead anyway.
2 ??rommon>?????????
// Secondly,when entered the IOS by Ctrl-Break within 60s from begining,I can see rommon> ,but if I press any key,the mouse jump to the next row ,as showed bellow:
System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
AS5300 platform with 131072 Kbytes of main memory
monitor: command "boot" aborted due to user interrupt
rommon 1 >
//???????????Ctrl-Break???????????????????????????????rommon>???????????????????????????????????
rommon 1 > #
rommon 1 > '
rommon 1 > H
rommon 1 > H
rommon 1 >
rommon 1 >