What's the proper of removing an MC32S?

[1kahuna]

It's been awhile since I've been in Element Manager. I was wonder if somebody could tell me how to remove an MC32S card from Element Manager?

 

[Firebird Scrambler]

From the command line OR via the virtual TTY port in Element Manager

To remove them, it should be (I think)

LD 14 TRUNK DATA BLOCK

REQ OUT xx Number of entries card (Max 32) (CRF)
TYPE VGW
TN l s c u Matches VGW card position (Test data)
REQ ****

To add them in will be..

LD 14 TRUNK DATA BLOCK
REQ NEW xx Number of entries card (Max 32) (CRF)
TYPE VGW
TN l s c u Matches VGW card position (Test data)
DES IP_PHONES (CRF)
XTRK MC32
ZONE 1 (CRF)
CUST 0
REQ ****



Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.myfreesites.net

linkedin

 

[1kahuna]

Thank you I was able to remove the VGW's, the card does not show registered in UCM.I have tried removing it from the signaling server I click on the check mark of the MC32S the I want to remove and select media card then delete. it ask if I'm sure and I click delete again then do a refresh but it's still in the node, did I miss something?