Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

What's an SFP, and how can I get rid of it? 1

Status
Not open for further replies.

T1PSTN

MIS
Apr 1, 2002
140
0
0
US
I've got a DN on my 11c that shows up as:

DN 10
TYPE SFP

Does anyone know what this is? I can't find any reference to it in the NTPs and even a search of MERL yielded no results. I would like to delete or change it so that I can use 1 for NARS. Any ideas?

Thanks
 
Don't want to sound rude, but why would want to use 1 as NARS access?

What is NARS now?
 
You are using 10 as the spre code OLD ROLMEN WORKING ON NORTELS
 
like PERRYPJ mentioned - 10 is your Spree code. you do not want to delete it but you can change it.

Print it in LD 21
Req: prt
Type: FTR


Change in LD 15
REQ: Chg
Type: FTR
SPRE: <-- enter the new number. this could be any available 1 to 4 digits
 
Thanks for the info everybody. I changed that SPRE to something better.

Acewarlock,

To answer your question, AC2 is 1 at all of my other sites, and it was set to 88 for this site. So, for the sake of uniformity, I wanted to change it to match the others.

Thanks again, I'll never forget what TYPE SFP means :)
 
sfp is a spre code system prefix you can change it in ld 15 under spre, note the new number and give it to your tech
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top