Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

what is the symbol of a watch on a display set?

Status
Not open for further replies.

MARCELJR38

Vendor
Nov 5, 2002
38
CA
I replaced a M7208 by a T7316 on a KSU 3X8... when I lift the hanset it choses line 2 by default and on the display apears a symbol of a watch or a chronometer (timer)... what is this feature and I can I remove it?

Thanks

marcel.richardjr@cnatelecom.com
 
your sets are programmed with an external autodial and this symbol is a pause (feature 78)

check in programmation of each extension and remove this number in it...

Good luck !!!
 
This ext has hot line programed on it. Go to admin and remove it.Hope this helps.
 
I do not know if it had a hot line before? I did not notice...
But finaly I took of the hot line feature and know it is OK
Thank you all
I am glad this web site exists and that their is great people answering.

marcel.richardjr@cnatelecom.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top