what is the symbol of a watch on a display set?

[MARCELJR38]

I replaced a M7208 by a T7316 on a KSU 3X8... when I lift the hanset it choses line 2 by default and on the display apears a symbol of a watch or a chronometer (timer)... what is this feature and I can I remove it?

Thanks

marcel.richardjr@cnatelecom.com

http://www.cnatelecom.com

 

[Rapetou]

your sets are programmed with an external autodial and this symbol is a pause (feature 78)

check in programmation of each extension and remove this number in it...

Good luck !!!

 

[MARCELJR38]

Thank you

marcel.richardjr@cnatelecom.com

http://www.cnatelecom.com

 

[btl47]

This ext has hot line programed on it. Go to admin and remove it.Hope this helps.

 

[AlquestTech]

Did it have a hot line programmed on it before Marcel?

 

[MARCELJR38]

I do not know if it had a hot line before? I did not notice...
But finaly I took of the hot line feature and know it is OK
Thank you all
I am glad this web site exists and that their is great people answering.

marcel.richardjr@cnatelecom.com

http://www.cnatelecom.com