what do i need for 3300 cxi can open a door

[cgonzalez7912]

hi

I already have a 3300 Cxi pbx and i wonder what do i need to do, to program the 3300 to open a door in my oficce
that has a interphone to open the door.


I realy apriciate your help , because I don´t know what do i need to program .

 

[paterson]

I don't believe the Mitel system has a OPEN DOOR feature specifically, but it may be able to interface with a Door control system via analog trunks/extensions. You would access the trunk or extension and then dial digits specific to the Door Control system.

_______________________________________________________________

If you did not take enough time to get it right the first time...

What makes you think that you have time to fix it?

 

[kwbMitel]

Are you trying to interface with existing equipment or building a solution from scratch

There are many solutions available to build from scratch.

If you're trying to modify an existing setup then options are much more limited. Part Numbers / Model Numbers would help.

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[Telecomp9434]

The Cxi has embedded analog ports so you could use a Viking solution.
The C-2000 B ( Door gate entry unit)
The E40-ss (Viking Door phone)
The Ve-3x5 (Surface mount box) is what I would recommend.
You still need power ran to the door for the stryker.

The Viking is a little more expensive than the off brand products but trust me it is worth the price!!

http://www.telecomp-inc.com

Voice and Data Solutions

 

[cwc3]

just did a search on google for someone else recently there are pleny of sip and ip video/doorphone/with contact closure
solutions out there google it...

 

[nytalkin]

The easiest I've found is the VIKING door opener interfaced to an analog trunk in the 3300. VIKING has a couple of door opener interfaces.

NO GOOD DEED GOES UNPUNISHED!

 

[Jakt99]

cgonzalez7912

Gents are right you can open the door with a 3rd party product attached to 3300 via either an ons or ls/gs port. I recently connected a CX II system to an analog ons port. Which worked this way.

basically twas a one way intercom. The user pushed the intercom buttom which is programmed up to go off hook, dial a multicall number which appeared on all the handsets. When answered and on the call chatting, the called party pressed a sequence of keys eg say ** the intercom's dtmf receivers are listening for tones and when detected trigger a build relay which inturn is wired to, and open the door.

 

[LoopyLou]

many different ways to do it depending on what the door control system needs to see to cause it to open. I think the paging has a set of contacts if not used for paging. we used to use a ring detect relay on an ONS port for things like that.