HELP (please)...
I've twi VPN profiles, one allows access to other nets when connected, the other does not. The latter works fine and I can get to clients on their 10.248.64.xxx domain.
The other connects fine, and shows my ip address as 192.168.5.xxx (changes each time). The cisco status shows 192.168.0.0 255.255.0.0 as being secured OK.
When I ping, or tracert, I get no replies. The cisco packets sent and encrypted increase, but there are zero packets received and decrypted.
Does anyone know if XP Pro does some funny local routing of teh 192.168 stuff?
It seems very strange that it works fine for the other client addresses.
Here is a copy of my route print...
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 20 e0 88 f7 d7 ...... Actiontec 802.11b Wireless PC Card - Determinist
ic Network Enhancer Miniport
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.168.0.1 10.168.0.5 30
10.168.0.0 255.255.255.0 10.168.0.5 10.168.0.5 30
10.168.0.5 255.255.255.255 127.0.0.1 127.0.0.1 30
10.255.255.255 255.255.255.255 10.168.0.5 10.168.0.5 30
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
224.0.0.0 240.0.0.0 10.168.0.5 10.168.0.5 30
255.255.255.255 255.255.255.255 10.168.0.5 10.168.0.5 1
Default Gateway: 10.168.0.1
===========================================================================
Persistent Routes:
None
Cheers.
I've twi VPN profiles, one allows access to other nets when connected, the other does not. The latter works fine and I can get to clients on their 10.248.64.xxx domain.
The other connects fine, and shows my ip address as 192.168.5.xxx (changes each time). The cisco status shows 192.168.0.0 255.255.0.0 as being secured OK.
When I ping, or tracert, I get no replies. The cisco packets sent and encrypted increase, but there are zero packets received and decrypted.
Does anyone know if XP Pro does some funny local routing of teh 192.168 stuff?
It seems very strange that it works fine for the other client addresses.
Here is a copy of my route print...
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 20 e0 88 f7 d7 ...... Actiontec 802.11b Wireless PC Card - Determinist
ic Network Enhancer Miniport
===========================================================================
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.168.0.1 10.168.0.5 30
10.168.0.0 255.255.255.0 10.168.0.5 10.168.0.5 30
10.168.0.5 255.255.255.255 127.0.0.1 127.0.0.1 30
10.255.255.255 255.255.255.255 10.168.0.5 10.168.0.5 30
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
224.0.0.0 240.0.0.0 10.168.0.5 10.168.0.5 30
255.255.255.255 255.255.255.255 10.168.0.5 10.168.0.5 1
Default Gateway: 10.168.0.1
===========================================================================
Persistent Routes:
None
Cheers.