VPN Phones

[rhawkins74]

Hey guys, I am just wondering what phones everyone is using for remote vpn phones? Our customers have been using 5610's, but they are getting harder and harder to get a hold of. I just need to find out, which phones to start pushing in replacement of the 5610's. Of course we have customers that want the 9641G's but, since they are not working in VPN mode yet.

 

[tlpeter]

Get 9620'2 for now.
The new 9608,21 and 41 should work but to be sure you better wait untill Avaya made some proper firmware for them


BAZINGA!

I'm not insane, my mother had me tested!

 

[rhawkins74]

Our account manager for our distributor says that the 08, 21,20,40, and the 9650 all work, but knowing the 41 isnt working as of now, I just wanted to make sure.

 

[kholladay]

The 9608 works without issue for me in VPN mode however the 9621/41 do not seem to be working.

Kyle Holladay
ACSS & APSS SME Communications
MCP/MCTS Exchange 2007
Adtran ATSA, Aruba ACMA

"I have one speed, I have one gear...GO!!!" - Charlie Sheen

"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford

 

[tlpeter]

Try 0.0.0.0/24 for the 21's and 41's

BAZINGA!

I'm not insane, my mother had me tested!

 

[kolob4all]

Could you share config for 9608, 41 ?

My config isn't working even I can see tunnel established on Sonicwall TZ210

## VPN Settings for 96xx VPN Phones to work with Sonicwall Firewall
## VPN Mode=Enabled
SET NVVPNMODE 1
## Profile Password
SET NVVPNCODE 876
##VPN user name
SET NVVPNUSER 1234
## To Access VPN Procedure 2 View/Modify Mode
SET VPNPROC 2
## VPN Vendor Other
SET NVVPNSVENDOR 4
## Sonicwall Public IP
SET NVSGIP "X.X.X.X"
## Encapsulation = 4500-4500
SET NVVPNENCAPS 0
## Copy TOS=No
SET NVVPNCOPYTOS 2
## Auth Type PSK
SET NVVPNAUTHTYPE 3
## IKE ID Group Name
SET NVIKEID "GroupVPN"
## Preshared KEY PSK
SET NVIKEPSK "xxxxxx"

## PHASE 1 PARAMETERS

## IKE ID Type =FQDN
SET NVIKEIDTYPE 2
## IKE XCHG Mode=Aggressive
SET NVIKEXCHGMODE 1
## IKE DH Group=2
SET NVIKEDHGRP 2
## Phase 1 Encryption Algorithm =3DES
SET NVIKEP1ENCALG 2
## Phase 1 Auth Algorithm=SHA1
SET NVIKEP1AUTHALG 2
## IKE Config Mode=Disabled
SET NVIKECONFIGMODE 2


## PHASE 2 PARAMETERS

##IPSec PFS DH Group=2
SET NVPFSDHGRP 2
## Phase 2 Encryption Algorithm=3DES
SET NVIKEP2ENCALG 2
##Phase 2 Auth Algorithm=SHA1
SET NVIKEP2AUTHALG 2
##Protoected Network
SET NVIPSECSUBNET "192.168.90.0/24"
## IKE Over TCP= Never
SET NVIKEOVERTCP 0

## XAuth Diabled
SET NVXAUTH 2
## Avaya Call Server
SET NVMCIPADD "192.168.90.x

 

[telecomsux]

kholladay,
We're having issues getting these 9608's to work too.

I can't even get this phone to get DHCP from the home router.

Could you share your set up??

Thx

 

[hairlessupportmonkey]

i got 9621G and 9641G phones to work better than the 9620!!

ACSS - SME
General Geek