benzguy777
Vendor
- Sep 17, 2002
- 74
- 0
- 0
My Win2K Server goes through out Linksys BEFSR41 Router so the Server only has 1 Network Interface Card.
Here is how I setup VPN:
I open Routing and Remote Access console in the Administrative Tools folder, right-click the server and then click Configure and Enable Routing and Remote Access>Virtual private network [VPN] server. Click Next if TCP/IP is only protocol you will use. Select a connection you will connect to on the Internet Connection.
Problem is then I get to this point. My only choice is "No Internet" or the only Network interface Card of the Server. When I choose the '3COM' NIC of the server it says:
"You have chosen the last available connection as the Internet connection. A VPN Server requires that one connectoin be used as the private network connection."
Any ideas?
Here is how I setup VPN:
I open Routing and Remote Access console in the Administrative Tools folder, right-click the server and then click Configure and Enable Routing and Remote Access>Virtual private network [VPN] server. Click Next if TCP/IP is only protocol you will use. Select a connection you will connect to on the Internet Connection.
Problem is then I get to this point. My only choice is "No Internet" or the only Network interface Card of the Server. When I choose the '3COM' NIC of the server it says:
"You have chosen the last available connection as the Internet connection. A VPN Server requires that one connectoin be used as the private network connection."
Any ideas?