Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Voip 1120e soft key issue

Status
Not open for further replies.

SnakeTech

IS-IT--Management
Apr 29, 2005
53
US
Hello All!!

I have a Nortel 1120e Voip phone running off a CS2100...

The soft keys are programmed with transfer and conference which seem to disappear when you go off hook to answer a call.

Then after 6 seconds they RE-APPEAR which is making the end users crazy.

A side note is that the 1140E soft keys do NOT disappear...........................

Has anyone experienced this or have a solution???

Thanks!

ST~
 
You could upgrade your UNIStim release to 5.5. But, it's unlikely to correct anything. The fixes are related to HTTPS provisioning, nothing regarding soft keys.

Found this solution: SOLN201808

Details that it's design intent. As the 1120 only has 4 lines of display, when you get a call, the CLID populates on Line 3 and if it's longer than 10 or 11 rows (Not the whole row, just enough of it. And I don't know where I got that number) the phone steals the 4th row from the soft keys to display additional information.

Hope this helps.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top