Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Voice announce on NEC IVS phone

Status
Not open for further replies.

rosiej

Programmer
Jan 10, 2009
33
I have an NEC IVS system. Almost all exts are Dterms and all work properly except one. When you call this one ext from any other ext, the call comes in on the speaker instead of ringing the phone. I have verified I am dealing with the correct ext#. Verified it's Service Restriction Class for class A and B; and verified that CM 1578 for this ext's service restriction is set to ring. I could find nothing in the user guide that allows the user to manually toggle this state. Any help?
 
if IVS look at following

Internal Tone/Voice Signaling
08 – 050, 051, 069, 148,156, 270/S
12 02, 07 F/S
15 67, 99 F/S
20 0 - 3 F/A63
 
thanks; I had looked in CM 20 to see if there was a feature that could be assigned a code for this; I missed it. I found it now and that cleared the problem. Thanks
 
Thanks Ozzie but just here to help and get it when i need it :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top