VMIB configuration

[busso]

HI

I have been following a number of threads here to get my voicemail working correctly.
I have setup the following.
An Aria 24 with 4 CO lines and 6 digital stations, VMIB card and Lanu card.
I setup the system so that when it is set to night mode VMIB answers the call, I then get the call to transfer to the attendant station when no response is received, to leave a message.
I set the attendant station to forward to VMIB, which seems to work for calls from other stations, but does not work when the call is transferred from the night message.

I have everything working except the attendant station answering the external calls.

Any ideas why this is not working?

Thanks

 

[doktor]

Do you use ISDN lines and the DDI table in PGM231 or analogue trunks using the dialling table in PGM144?

///doktor

 

[busso]

Hi, thanks for the response, it looks like a new firmware was released last night that allows hunt groups to overflow to a voice message. This solves my problems.

Thanks

 

[doktor]

Thanks for your status update - wellcome back.

///doktor

 

[Chjppie]

Hi Busso, just out of curiosity what version software have you just received?

 

[busso]

hi Chippie, running 3.9 now.

 

[Chjppie]

Hi Busso

Thanks for that... Ver 3.9 has not been released in NZ and I liked the idea of having a group mail box... that's why I asked.

Something for us to look forward to!

 

[busso]

I would have thought the release would have been global.
The group mail box made setup so much easier. We had a couple of customers looking for this feature and when it was released it only took 15 mins to get it working properly.
Hope you get access to 3.9 soon.

 

[doktor]

Normally, it would take a short time to get it to work - with LG...

///doktor