Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VM/Time Profile question.

Status
Not open for further replies.

l33byt1

Vendor
Feb 21, 2006
126
GB
I need to check some thing quickly.

1 DDI goes to Hunt group main during office hours.

There is a time profile for office hours, this is in my Hunt group main fall back group and I have a night service group off the main group.

So during the day I record standard greeting all fine.
But the night serivce seems to do what it wants. I rang in last night to test and its going to the main hunt group still but the default greeting saying User ID 336 is not avai..........................

Where do I record the night greeting. SW is 3.1 65.
This is child play and have done this many times before but some thing is not right.
 
? do this time profiles from VMPRO it seeems easier than using the time profile at IP office.It is too flexible from IP office time profile.But I dont know if you have VMPRO.
 
enter the Mian VM mailbox as ususal
option 3 for greetings
option 2 for out of hours greeting
(opt 1 is standard greeting opt 3&4 are for que greetings)
 
Did you record your messages on Huntgroup level or on user level??
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top