Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Virtual Extension external transfer

Status
Not open for further replies.

Bill C

Vendor
May 20, 2019
8
US
I have a virtual extension setup to call forward all calls to an external number. Do you know if there is a way to do a hook flash on the incoming analog trunk for this transfer so I don't use another analog trunk?






















































































































































 
Bill,

I have done what you are wanting to do several times. Here is the trick...
in 24-09-01 set it to call forward [highlight #FCE94F]no answer[/highlight]
in 24-09-02 and 03 set it to the outside number by entering 9P(XXX)XXX-XXXX (add a 1 for long distance)
in 20-29 assign the virtual station to an unused timer class (I usually use timer class 3)
in 20-31-15 for timer class 3 (in the upper right) set item 15 to 2 seconds.

This will allow the outside transfer.

John
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top