Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Viking BLK-4/EWP with 3300

Status
Not open for further replies.

AlphaMann

Technical User
Nov 16, 2012
289
CA
Anyone setup one of these guys with MiVB 9.X controller?
This is old school and have the general idea but any pointers would be appreciated.

Thanks,
 
looks like its an analog device - would probably have to be connected in parallel with an analog extension and is triggered by the ring voltage

i don't believe it would be able to be used alongside any form of ip device (sip or minet)
- pretty sure there are sip versions that could be used for that - would connect it a generic sip extension to the device and put it in ring all ring group with phone



If I never did anything I'd never done before , I'd never do anything.....

 
So you figure and analog extension and not a trunk access then. I will give that a try.
It is an existing device from and old Avaya that I think is using a Relay Port for contact closure.....
Thanks,
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top