Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VFP 9.0 Beta Release 4

Status
Not open for further replies.
keepingbusy,

an old trick for Win98/VFP8 was to be sure that GDIPLUS.DLL was in C:\WINDOWS folder.

TheSofty
 
A required .DLL file, GDIPLUS.DLL, was not found

I have a machine here working under windows 98, and had the same message.

U can searching on the internet for the gdiplus.dll and download it to the vfp 9 folder, and then it works.
 
Keepingbusy,

The error comes on W98, solution: copy and paste the GDIPLUS.DLL (present on the pc when you have installed previous VFP versions) into the directory where you have installed VFP9.

regards,

Koen
 
Thanks for replying all

rgbean

As above, (I'm using Using Windows ME)

thesofty

an old trick for Win98/VFP8 was to be sure that GDIPLUS.DLL was in C:\WINDOWS folder

Have to say, that had I known about the file, I would have copied it over! (Thanks for the advice anyway)

ronald777

U can searching on the internet for the gdiplus.dll and download it to the vfp 9 folder, and then it works

The .dll was already present in the folder and still didn't work but thank you anyway

koenpillar

That's the info I was looking for and I was able to resolve the issue by copying the .dll file into c:\windows and VFP9 it works perfectly (Thanks again)

Kindest regards
Lee



Alone we can do so little, together we can do so much
(VisFox Version 6 User)
 
Sorry, I got roenpillar and thesofty the wrong way around! Thanks again guys

Lee

Alone we can do so little, together we can do so much
(VisFox Version 6 User)
 
I just visited the MS site to download the 9.0 Beta and got an error that the page can not be found. Have they disabled the Beta download?

 
SGLong

I just visited the MS site to download the 9.0 Beta and got an error that the page can not be found. Have they disabled the Beta download?
Click to expand...

I'm still able to get it.
Do this link work for you?
Visual FoxPro Beta 9 Download

Mike Gagnon

If you want to get the best response to a question, please check out FAQ184-2483 first.
 
Mike,

Nope - I still get "This page cannont be displayed. The page you are looking for is currently unavailable. The Web site might be experiencing technical difficulties, or you may need to adjust your browser settings."

Steve
 
Steve

I'm not sure what the problem is, I can get to it. Maybe someone else can confirm (or not) the problem.


Mike Gagnon

If you want to get the best response to a question, please check out FAQ184-2483 first.
 
When I click ont the link, new browser window opens and download started. Using Mozilla 1.7 W2k SP4

Regards,

Mike
 
Is the release of VFP 9 still set for September 29, 2004?

Although I'm still plodding along with good old VFP 6, I need to get a new copy of VFP 8 in a couple weeks in order to synchronize with other partners using VFP 8. The problem is that I'd hate to miss out on getting version 9. I know in years past that if a person bought a version just before the release of the next, there was a special deal or provision to upgrade or get the new release at little or no extra cost. Does anyone know if that's still done? I'd hate to buy a version just before it's replaced...

thanks, dbMark
 
While the VFP 9.0 release is expected during this year's VFP DevCon - September 29 - October 3 ( of course this is not for sure. If the beta testers find a "major" problem shortly before this time or MS simply decides the timing isn't right, there may be a delay. It is unlikely it will be released before then.

Also, remember that a release date usually means that it was released to manufacturing (RTM), and while it may be available for downloading from the MS subscription site shortly after this, it may not be in retail channels for another 6-8 weeks (based on historic experience).

Rick
 
Microsoft has never publically pegged a date for release, nor have they said it will be released at DevCon. The official word is that it will be released this fall and DevCon is the official release announcement. That doesn't mean release will occur at that time. Microsoft has done release announcements in the past, but not released until after that.

One other thing to keep in mind. In Microsoft speak, release means "Release to Manufacturing" (RTM). This means that the bits are ready to go. Shortly after, you'll be able to download from MSDN subscriber downloads (assuming you have an MSDN subscription). It will take 6-8 weeks after RTM for the CDs to be made and packaged. Then it is "shipping", which means you can buy the CD from your favorite reseller.

Craig Berntson
MCSD, Visual FoxPro MVP, Author, CrysDev: A Developer's Guide to Integrating Crystal Reports"
 
I've downloaded Visual FoxPro 9 beta and would like to install it to check it out on a Windows Millennium workstation, even though not supported officially. It's the one I have lots of my xBase files on. I looked on my Windows XP and saw that there were 2 GdiPlus.dll files! Which do I use? Does it make a difference?

Directories in C:\Windows\WinSxS:

x86_Microsoft.Windows.GdiPlus_6595b64144ccf1df_1.0.0.0_x-ww_8d353f13
07/16/2003 12:14 PM - 1,700,352 bytes
MS GDI+ 5.1.3097.0


x86_Microsoft.Windows.GdiPlus_6595b64144ccf1df_1.0.10.0_x-ww_712befd8

07/16/2003 12:14 PM - 1,703,936 bytes
MS GDI+ 5.1.3101.0

dbMark
 
You should use the GDI+ DLL for ME! Not one from XP - otherwise you may create problems for yourself, totally unrelated to VFP!

Rick
 
Update for those Windows 98 or Me users who are running VFP9beta: Last night Microsoft released a security update for GDI+ #MS04-028 - Buffer Overrun in JPEG Processing (GDI+) Could Allow Code Execution (833987). I decided to check my August 24 link above to see if a new GdiPlus.dll file was available there too. Surprise, when I clicked on the GDI+ RTM link I got a so sorry message The download you requested is unavailable ... try the "Search for a Download" area on the Download Center home page.

So here is the new Platform SDK Redistributable: GDI+ gdiplus_dnld.exe dated 09/14/2004 and GDI+ version 3102.1360 where gdiplus.dll is 1,645,320 bytes dated 05/04/2004 11:53a:

Here is the new GDI+ detection tool gdidettool.exe to test for vulnerable Microsoft applications (obviously it can't check third party software) dated 09/14/2004:

Note these installation instructions in the accompanying redist.txt:

- For Windows XP use the system-supplied gdiplus.dll. Do not install a new gdiplus.dll over the system-supplied version (it will fail due to Windows File Protection).

- For Windows 2000, Windows Millennium Edition, Windows NT 4.0 and Windows 98, install gdiplus.dll into the private directory of the application not into the system directory.

dbMark
 
Does anyone know where the setup wizard for distribution disks has gone in this version?

Lee....

VisFox Version 6 User / Windows ME
 
There hasn't been a Setup Wizard for several versions now. Instead, you use the Installshield Express, Special Edition. It is a separate download on the same page as the beta download.

Craig Berntson
MCSD, Visual FoxPro MVP, Author, CrysDev: A Developer's Guide to Integrating Crystal Reports"
 
Status
Not open for further replies.

Similar threads

RTD78
  • Question
VFP Form Refresh
Replies
2
Views
187
RTD78
RTD78
A_Radiolog_inFoxPro
  • Solved
GETWORDCOUNT () IN VFP 6.0 ?
Replies
11
Views
593
StefanFoerner
StefanFoerner
Ashwani Bansal
  • Locked
  • Question
Sending bulk email messages from VFP 6.0 and VFP 9
Replies
12
Views
1K
Dan Olsson
Dan Olsson
sdocker
  • Question
InstallShield and VFP 9 Merge Modules.
Replies
11
Views
606
Chris Miller
Chris Miller
Jay9988
  • Question
VFP to doesn't launch Ms Word's mailmerge 1
Replies
10
Views
986
Jay9988
Jay9988

Part and Inventory Search

Sponsor

Back
Top