Very simple - call forwarding, how do I change number of rings!? 1

[ansellrk]

As above,

Thanks.

 

[corrupthalo]

RCO on the extension.. Ringing Cycle Option ie how many rings before doing the hunt or fdn treatment.

There are 3 rco's defined on the system and these are altered in ld 15.

 

[ansellrk]

Out of interest do you know what the three RCO's default settings are?

We are using 0 at present which appears to be 6 rings...

Thanks

 

[phonz1]

the defaukts are 4

 

[ansellrk]

I must be missig something.. I can't find the option in LD 15... Where is it please?

 

[Trevatwork]

Hi

rco limits are 1 to 15 rings.(under cfno in ld 15)

MORE THAN 4 RINGS

It's cofigured via the RCO (0, 1 or 2)prompt on the set.
The RCO prompt is related to the CFN0, CFN1, CFN2 and the DFN0, DFN1, DFN2.
If CFN2 and DFN2 are configured with a 9 and your set has configured with RCO 2 your phone is going to your voicemail after 9 rings

CFN0
CFN1
CFN2
DFN0
DFN1
DFN2

Trevor

 

[phonz1]

LD15

REQ: CHG
TYPE: RDR_DATA

cr to cfn0 and add your RCO number 1-15

 

[Trevatwork]

Sorry forgot

To change the setting.
REQ: CHG
TYPE: RDR (CDB release 20 only)
TYPE RDR_DATA
CUST 0
Press enter until the timer prompts are reached
CFN0 Amend the settings to your requirement.
CFN1
CFN2
DFN0
DFN1
DFN2
Press the Enter key (Carriage Return) until you see the REQ prompt again

 

[ansellrk]

Excellent! Thanks you everyone for the contribution it is much appreciated.

 

[NastyNed2]

What's the distinction between CFN and DFN?

 

[phonz1]

CFN is normal rings
DFN is distinctive rings

 

[SpelingChampeon]

Just remember, whenever you make a change to a CFN or DFN in LD 15 the change is system wide for any telephone with a matching RCO.