Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VCM64 V2/ATM4 V2 Can I use the 4 port trunks as analog device ports? 1

Status
Not open for further replies.

vobarex77

IS-IT--Management
Jun 18, 2015
55
US
I have never had a request like this, but customer is strapped for cash, cannot afford a Phone8 card....I know...

anyways, is there any way to use this ATM4 as a station card instead of a trunk card? IPO 500V2 9.1...
 
Thats what I thought, its interesting to me that my distributor told him this would work...aye aye aye...thanks again.
 
I know, I know..I guess its a Viking E-40 door phone they are trying to hook up, I guess their sales guy told them it was possible, looking at the documentation now apparently it can use a trunk port. So all is well, other than the fact that I have to hook it up somehow.
 
The Viking E40 is a single line telephone, to connect to a trunk port you would need to add a Viking DLE-200B two-way ring down adapter. That will probably cost more than a Phone-2 card. The Viking E40 will also probably work better as a single line station with the IPO programmed for hotline dialing when it goes off hook
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top