Dec 10, 2014 #1 jcosgrove Vendor Feb 10, 2004 163 US What is the minimum software version for these newer V2 VCM cards to work on an IP500v2 chassis?
Dec 10, 2014 #2 tlpeter Programmer Dec 5, 2005 27,844 NL 8.1 something so i would upgrade to the latest 8.1 or 9.0 release to be sure. BAZINGA! I'm not insane, my mother had me tested! Upvote 0 Downvote
8.1 something so i would upgrade to the latest 8.1 or 9.0 release to be sure. BAZINGA! I'm not insane, my mother had me tested!
Dec 10, 2014 #3 WellingtonPaez Technical User May 29, 2012 28 US Daughter cards normally will get updated by the SD card automatically by your IPO, when using it as the HTTP/TFTP Server. Upvote 0 Downvote
Daughter cards normally will get updated by the SD card automatically by your IPO, when using it as the HTTP/TFTP Server.
Dec 10, 2014 #4 Gunnaro Vendor Aug 27, 2010 4,753 NO The last R8.0 should take it as well. Kind regards Gunnar ______________________________________ Mille viae ducunt homines per saecula Romam Upvote 0 Downvote
The last R8.0 should take it as well. Kind regards Gunnar ______________________________________ Mille viae ducunt homines per saecula Romam
Dec 10, 2014 #5 intrigrant Systems Engineer Jun 21, 2004 11,626 CA A VCM32v2 in version 7 will show up as a VCM64 with 24 free Avaya IP endpoint license. Not sure if the card actaully works.... Upvote 0 Downvote
A VCM32v2 in version 7 will show up as a VCM64 with 24 free Avaya IP endpoint license. Not sure if the card actaully works....