teletechman
Technical User
I have errors on the monitor that I am trying to find out what they mean.
VCM DSP packet routing errors, invalid IP address 0x0a2b0501
TI VCM: DSP core corresponding to IP address 0x0a2b0501 not found
I am having some weird issues with an IPO R12.1 that I am searching for answers to. The system is set up to page all phones and it worked for a couple of hours then some of the phones stopped being able to be paged. Another is that the SCN site receives a call but only certain phone can talk to the client they can hear but not talk to them. Other can do both mix of a 1400 and j series phones. Then I was told they all could not talk to clients. the weird part is my cell number works every time at all locations. I am at a loss as I have never had this before, call between locations work fine. The trunks are SIP and going to the main site then across SCN to the other.
Mike
VCM DSP packet routing errors, invalid IP address 0x0a2b0501
TI VCM: DSP core corresponding to IP address 0x0a2b0501 not found
I am having some weird issues with an IPO R12.1 that I am searching for answers to. The system is set up to page all phones and it worked for a couple of hours then some of the phones stopped being able to be paged. Another is that the SCN site receives a call but only certain phone can talk to the client they can hear but not talk to them. Other can do both mix of a 1400 and j series phones. Then I was told they all could not talk to clients. the weird part is my cell number works every time at all locations. I am at a loss as I have never had this before, call between locations work fine. The trunks are SIP and going to the main site then across SCN to the other.
Mike