VCM Cross Compatibility IP400/IP500

[pingableinc]

- Would anyone know if the specs (EC) on the IP500 modules are the same or better than the *rev 2* VCM modules on the Ip400 series

-IP400/IP500

On the 400series, remote endpoints, remote phones, etc did not require any addition licenses. I recall that on the 500 series/IP500 VCM, just short of the licenses that allows more channels , it will also require a license for endpoint, remote phones, etc.

 

[janni78]

You should not need any license to use IP phones on the IP500. You should be able to use them already in standard mode if I remember it correctly

 

[telecomtekperson]

That is the 3rd party endpoint license you are referring to, I beleive.

 

[jamie77]

Avaya 46XX & 56XX IP Phones do not require licenses.

The IP500 VCM cards (32 & 64) come with 4 channels and require RFA's for more channels.

Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office

http://www.alliedcom.co.uk

Fooball is not a matter of life and death-It is far more important!!!!