Valcom V-2001A with Ip Office 500 V2 1

[esparodri]

Has anyone gotten this to work with an analog station?

 

[mforrence]

Sure. Set station to page port, use an isolation transformer. As straight-forward as it gets.

 

[esparodri]

That's the way I have it.
Analog extension is set to paging speaker.
Short code is
*98
Dial Paging
2281
0
I also habe a WMT1A transformer in between. Rebooted system and still doesn't work.

 

[mforrence]

1. Power cycle (not just reboot) IPO with analog station held off-hook with telephone/test set.
2. Analog station is member of page hunt group
3. Short code is aimed at hunt group
4. WMT1A is a fine choice for isolation transformer
5. If still no joy, put your test set in line across tip/ring and make test page - to confirm that audio is coming out of station port.

 

[esparodri]

Thank's mforrence will do that Monday.

 

[pmcook]

Try shorting the TR pair with a 600 ohm resistor. Easiest way is to use a biscuit jack and a short patch cord then install the resistor across TR. Also, sometimes you have to short the second TR pair to force the port open on the paging system.