Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

vacant number message when ringing busy attendant LDK-300 Hotel

Status
Not open for further replies.

jmcevoy

IS-IT--Management
Oct 22, 2014
21
GB
Hi , I have a LDK 300 Hotel with the issue in the subject when guest's ring the busy attendant they get the message vacant number , This also happens when ringing another station on the system , This is a recent development on the system , Problems seems to have occurred after i set up the Auto-attendant and I'm at a loss as to what has happened .
 
Double check pgm 164, vmib prompt usage pgmg and atndt queuing prog.
Although should not get vacant msg calling attndt whatever you did in a atndt ?, poss reset if above not work.
 
Turns out they had an Analogue phone plugged into a Digital extn. port and the attendant problem was incorrectly reported .


Thank you all for your help .
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top