V4.2 - S0/T0 BRI (IP 500)

[IPmonkey]

The Avaya Technical Presentation for V4.2 states that I need a crossover cable to convert a IP500 BRI port to Sbus.

Can anybody help with the pin-out for the above mentioned crossover cable, and has anybody got the above working on V4.2 beta?????

 

[TomMills]

crossover cable is just blues and oranges switched i think

you can buy them pre made.

 

[IPmonkey]

I got it sorted in the end..

Blue's & Greens crossed & needed to use an Isdn Balun (mod-tap).

 

[TomMills]

really? weird,

im in the uk, and i was sure its blues and oranges. im either stupid or its different

(cue 30 replies confirming im stupid)

 

[TeleKing]

cross pin 4+5 with 3+6.
4 - 3
5 - 6

 

[jamie77]

Blue(4&5) and Orange(1&2) is PRI in the UK

Not stupid, just confused!!!!!

Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office

http://www.alliedcom.co.uk

Football is not a matter of life and death-It is far more important!!!!

 

[VoiceonData]

tom,

thats a standard data crossover cable

the bri is different, you can just by a modtap to do the job


voiceondata

http://www.voiceondata.co.uk

 

[TomMills]

i seem to spend my life confused

 

[Bas1234]

1_______________1

2_______________2

______ ______
3 \ / 3
X
4______/ \______4

______ ______
5 \ / 5
X
6______/ \______6

7_______________7

8_______________8


This makes it more easier i hope.

Greetzzz....Bas

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[intrigrant]

Bas, well call you wontwork in the future

Pair 4 and 5 must be crossed with pair 3 and 6
see:

http://www.support.nsgdata.com/RouterDocs/user_guides/gt_70_series/pinoutc.htm

 

[kholladay]

HAHA! I think you have made it worse.

http://www.ipofficeassistance.com/files/T1 Crossover Cable.bmp

Don't ask why I used blue and green and yes I leave out the extra wire as they do nothing.

Kyle Holladay
ACA-I, ACA Call Center, ACS-I, ACS-M, TIA-CTP, MCP/MCTS Exchange 2007
ACE Implement: IP Office

"If it worked the way it should you wouldn't need me

 

[IPmonkey]

the bri is different, you can just by a modtap to do the job"

As I said in the third post, I needed to use a crossover cable (blues & greens crossed) and an isdn balun.

I Couldn't get it to work with out using both!!