Under Discovery I have TCP Discovery checked.
NIC IP 172.16.10.10
NIC Subnet 255.255.255.0
Lower IP Range 172.16.10.1
Upper IP Range 172.16.10.254
IP Seach Criteria is blank until I click on the line above the following displays:
172.16.10.1 - 172.16.10.254;
So I then updated the string to:
172.16.10.1 - 172.16.10.254; 172.16.11.51; 172.16.21.51; 172.16.31.51;
IP Search Criteria
This section is used to enter TCP addresses to be used for the TCP discovery process. Individual addresses can be entered separated by semi-colons, for example 135.164.180.170; 135.164.180.175. Address ranges can be specified using dashes, for example 135.64.180.170 - 135.64.180.175.
SCN discovery checkmark will then discover all systems and grab config from all systems and also send back to all systems when you save. Shows very nicely the SCN problems.
I had windows firewall turned off but also had to remove the firewall from the NIC completely. On a workstation it was fine but on windows server this is what I had to do for manager to see the remote sites. Thanks for the help.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.