using a menu tree in LSP system ( vector ) to going to coverage

[ayavauser]

we have setup a vdn - thats routes to a vector - this is used at the S8300 LSP site - where the announcements are

calls ring to sets but never go to coverage - just continue to ring ?

Number: 29 Name: Support
Multimedia? n Attendant Vectoring? n Meet-me Conf? n Lock? n
Basic? n EAS? n G3V4 Enhanced? n ANI/II-Digits? n ASAI Routing? n
Prompting? y LAI? n G3V4 Adv Route? n CINFO? n BSR? n Holidays? y
Variables? n 3.0 Enhanced? n
01 wait-time 0 secs hearing ringback
02 collect 1 digits after announcement 1500
03 route-to number 1401 with cov y if digit = 1
04 route-to number 1402 with cov y if digit = 2
05 route-to number 1403 with cov y if digit = 3
06 route-to number 1404 with cov y if digit = 4
07 route-to number 1405 with cov y if digit = 5
08 wait-time 4 secs hearing silence
09 route-to number 1499 with cov y if unconditionally
10 stop
11

* pressing 1 thru 5 all ring the sets they should

* calls route fine if coming from VM - rings phone - goes back to Audix

* calls ring fine when phone to phone - rings phone - goes to Audix

*calls ring fine when calling DID# - rings phone - goes to Audix

trace shows it leaves vector steps - rings phone but never
coes to cover path - point # 1 ( Audix )

strange ?

cheers : )


ayavauser

 

[sistech]

try the command "disp events", see if that comes up with anything