Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Using a 9508 DS handset on IPO 500 2

Status
Not open for further replies.

safenestvmem

Technical User
Nov 16, 2019
96
US
Is it possible to get a 9508 to work on a IPO 500 Server? I thought if I loaded a 9508 .bin files to the SD.

Is this possible?
 
Thank you I'll connect it to a DS port and see if it boots up. Would a 9508 work by any chance on the SOE?
 
The 9508 needs R7 or later - see the matrix

Give it a try and see what happens. Sometimes unsupported phones will work in a very basic way - but not recommended for production!
 
Well the 9508 did not boot up I tried to open the SD card on the SOE and 500 but could not.

What is interesting is that I was able to log a 9608 in just fine to an extension with an IP address. The display came up but the phone keeps looking for a file every min or so.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top