Use main office system for remote office outbound 1

[briansmith]

I am currently setting up a remote office with an IP403 and would like it to use to IP406v2 in my main office for outbound calls. I can call back and forth to extensions but when I attempt to make an outbound call at the remote 403 it just drops the call as soon as I finish dialing. Anyone have a reference on how to set this up?

Thanks.

 

[jamie77]

I assume you have IP Trunks between the sites.

Send your dial out short code to the IP Line.

If you use 9 for an outside line you will need the short code to send that to line too rather than stripping it off like normal.

Jamie Green

ACA:Implement - IP Office
ACS:Implement - IP Office

http://www.alliedcom.co.uk

Football is not a matter of life and death-It is far more important!!!!

 

[briansmith]

Bingo! the extra 9 did it, thanks!