Upgrading modules to 9.1

[sagbab]

I see in the documentation that IP400 modules no longer are supported in 9.1. However, we have our inhouse system on 9.1 and it includes a IP400v2 Phone 16 module. So I wonder if the 400v1 modules are not supported, and the 400v2 are supported even though I can´t find it in the documentation?

I´ve also tried to find the Matrix for 9.1 but fail there as well. If anyone has a link to it I´d appreciate it.

Thanks!

 

[sagbab]

Got the answer now, v1 is not supported, v2 is.

 

[intrigrant]

1 there is no 9.1 matrix and if it ever comes it will be a very stripped version as Avaya cut on the documenters budget although they say they were too busy which makes sense if half the staff is fired.

2 Only IP400 ATM, DSv2 and POTSv2 expansion modules are supported in R9.1 not the DS8 port versions.

http://marketingtools.avaya.com/kno...llation/index.htm?ip400_expansion_modules.htm

 

[sagbab]

Thanks intrigrant,

A bit worrisome to hear half the staff is gone. Would explain the serious misstakes that has been made lately though (thinking of twinning functionality that stops working after upgrading to 9.0.2, and that its not solved in 9.0.3 even though ticket was opened before release)