I need to upgrade from Mics 6.1 to Mics 6.1XC. The upgrade Docs. and posts have conflicting info.
Will I lose the Data base when I install the 6.1XC ROM and if so can I restore from the 6.1 backup?
The upgrade procedure is the way it should work ... It has worked for me ...
as nortelnorstar said, just swap out the ROM
a catch is ensure the NVRAM is Rel2
Do the software upgrade before the hardware upgrade
Always Always backup ...if possible do manually as well
Keep keycodes handy
Be very careful when downgrading - that tends to change the system ID
Thanks for the replies Marv & Senk1s.
We recently upgraded this system from R1T1 to what we thought was 6.1XC which required manually reprogramming 100+ stations. After the upgrade we discovered that the software was mislabled as 6.1XC when in fact it was Mics 6.1. I was concerned when I saw a post that said going from non XC to XC software causes a cold restart.Thanks again for your replies. I hope things go smoother than the first time around.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.