Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

UPGARDE A SECOND 6 PORTS EXPANSION FIBER CARD XC 7.0 4

Status
Not open for further replies.

luisb001

IS-IT--Management
Nov 5, 2011
27
hello
i try install a second 6 ports fiber expansion card, but. when turn on the power the mics only say "in maintenace". my xc software is 7.0
I have a 6-port card fiber expansion already installed in slot 2 (right) and work fine. but install the second card and only say "IN MAINTENACE"
please help me
thanks a lot
 
to change the sotware card do I need to shut down the system, right?

thanks a lot.
 
Just make sure you follow exsmogger direction and do the software first. If you add hardware and software at the same time it will default.
 
I'm looking for mics xc 7.1 Software with nvram, and find one, that says mics xc 7.1 upgrade kit tools, what is the difference between the two?

thanks a lot
 
Thank you very much for their valuable help and time.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top