Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
updating i2002 firmware on itg
- Thread starter uthorns
- Start date
You use OTM
In the ITG node info - select Config | Synchronize | transmit
check ehterset firmware
use the browse button to find the .bin file and start transmit
you may have to disable card and reset card when done
you will also have to reset all phones (isetReset)
In the ITG node info - select Config | Synchronize | transmit
check ehterset firmware
use the browse button to find the .bin file and start transmit
you may have to disable card and reset card when done
you will also have to reset all phones (isetReset)
ryEngineer
Programmer
OK
disable in the card in the pbx and refresh the status on the OTM
and then u/l
dont forget to download the latest FW for Phase 1 B76 for Phase 2 D9I
Regards,
Rami Yacov
disable in the card in the pbx and refresh the status on the OTM
and then u/l
dont forget to download the latest FW for Phase 1 B76 for Phase 2 D9I
Regards,
Rami Yacov
- Thread starter
- #4
Thanks for the help.
When I try to u/l I get an error:
Download of firmware to card is in progress. Card TN = 20.
File transfer lock is available for this node.
The firmware file transfer was unsuccessful due to invalid firmware file name.
Released the file transfer lock successfully.
The file name is 0604D31.bin, any ideas what may be wrong?
When I try to u/l I get an error:
Download of firmware to card is in progress. Card TN = 20.
File transfer lock is available for this node.
The firmware file transfer was unsuccessful due to invalid firmware file name.
Released the file transfer lock successfully.
The file name is 0604D31.bin, any ideas what may be wrong?
- Thread starter
- #6
yep, we will need to upgrade....thanks.
A new issue...since the first time I plugged one of the new phones into the network the older phone, (ntdu76ab), are not able to find the server when they are turned on.
I get a server unreachable error and it reboots. I had this phone working fine, unplugged it to try one of the new phones, and now when I plug it back in it doesn't work.
Could the newer ntdu91bb phones have caused some kind of issue that now won't allow the older models to come up now.
I do have some of the older models that were never unplugged that are working fine, it's just when I unplug one and try to put it back on.
A new issue...since the first time I plugged one of the new phones into the network the older phone, (ntdu76ab), are not able to find the server when they are turned on.
I get a server unreachable error and it reboots. I had this phone working fine, unplugged it to try one of the new phones, and now when I plug it back in it doesn't work.
Could the newer ntdu91bb phones have caused some kind of issue that now won't allow the older models to come up now.
I do have some of the older models that were never unplugged that are working fine, it's just when I unplug one and try to put it back on.
- Status
Similar threads
- Locked
- Question
- Locked
- Question