Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Unable to log into UCM after initial set up

Status
Not open for further replies.

pgh72

Technical User
Jan 22, 2008
74
US
I have installed a Avaya ipo 500v2 8.0.43 with a UCM. I was able to log into the UCM when i did the initial set up in my office. I changed the ip of the UCM to 192.168.0.111.
WHen i go to a web browser and type in i am unable to log into it.
Any help would be appreicated.

Thanks
 
Did you connect it to a network? Disconnect it and while on the network ping the address, if there is a reply ther are duplicate IP adresses. We had this problem and could not access the UCM at all.
 
The ip office is on the network. I tried pinging the ip but no response.Should i connect a patch cable from the front of the UCM to their network ?
 
In IP Office manager > control unit you can see the IP Address used by the UCM module, it must be on the same subnet as IP Office.

A simple mind delivers great solutions
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top