hbgpensfan
MIS
Hello, I was wondering if someone could point me in the right direction as far as troubleshooting a reaccuring problem I'm running into. I'm getting the following error about every Wednesday. It basically requires me to reboot the server in order to get everyone up and running properly. I do as part of my backup strategy have Arcserver rebooting the server after it's backup every Friday. Here's the error.
Event Type: Error
Event Source: Srv
Event Category: None
Event ID: 2020
Date: 3/5/2003
Time: 8:25:15 AM
User: N/A
Computer: UWCR-DC
Description:
The server was unable to allocate from the system paged pool because the pool was empty.
Data:
0000: 00 00 04 00 01 00 54 00 ......T.
0008: 00 00 00 00 e4 07 00 c0 ....ä..À
0010: 00 00 00 00 9a 00 00 c0 ....š..À
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
0028: 28 01 00 00 (...
I've tried doing what Microsoft recommends in the knowledgebase article Q312362, however it hasn't fixed the problem.
Thanks for any help in advance.
Bill Swanson
Event Type: Error
Event Source: Srv
Event Category: None
Event ID: 2020
Date: 3/5/2003
Time: 8:25:15 AM
User: N/A
Computer: UWCR-DC
Description:
The server was unable to allocate from the system paged pool because the pool was empty.
Data:
0000: 00 00 04 00 01 00 54 00 ......T.
0008: 00 00 00 00 e4 07 00 c0 ....ä..À
0010: 00 00 00 00 9a 00 00 c0 ....š..À
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
0028: 28 01 00 00 (...
I've tried doing what Microsoft recommends in the knowledgebase article Q312362, however it hasn't fixed the problem.
Thanks for any help in advance.
Bill Swanson