Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
UCX 50 - Silent Monitoring
- Thread starter dp1234
- Start date
The silent monitoring feature is listed on the Feature Code Admin page (PBX - PBX Configuration - Feature Codes) in the "Core" section. The name used for the feature is ChanSpy and ChanSpy Direct - the default feature codes are 555 and 779. The password to be used for ChanSpy Direct is right next to it.
The ChanSpy feature allows silent monitoring starting with a randomly selected extension. The ChanSpy Direct allows silent monitoring starting with a specific extension.
While on the call, the caller can
a) change the volume by pressing the # key (cycles in the sequence 1 2 3 4 -4 -3 -2 -1 and over again).
b) switch to another active extension by pressing the * key
c) switch to a specific extension by dialing the extension and pressing #
The ChanSpy feature allows silent monitoring starting with a randomly selected extension. The ChanSpy Direct allows silent monitoring starting with a specific extension.
While on the call, the caller can
a) change the volume by pressing the # key (cycles in the sequence 1 2 3 4 -4 -3 -2 -1 and over again).
b) switch to another active extension by pressing the * key
c) switch to a specific extension by dialing the extension and pressing #
- Thread starter
- #3
- Status
Similar threads
