Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

UCM fault - ata1.00: device reported invalid CHS sector 0

Status
Not open for further replies.

mic501

Technical User
Dec 28, 2006
157
MT
My UCM (version 1) cannot boot the Applications and when I tried to boot from USB to re-install it, I couldn't manage to finalise the installation as I see an error in system status that installation failed.
I connected a screen using HDMI to the module and I noticed some messages during installation of the kind:
"ata1.00: device reported invalid CHS sector 0"

Anyone met this?
In my research it seems that this is an error on the disk, but would a normal SATA card work if I try to replace the one connected to the module? or do I have to replace the entire UCM?

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top