Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

UCM 11.1 Onex Portal Fails : System Status Shows "Application failed to start"

Status
Not open for further replies.

infonaut

Technical User
Mar 18, 2009
192
BS
Hi all,
IPO 500 v2 11.1.2.2.0 build 20 with UCM hosting voicemail and one X services. one-X Portal service will not start properly on UC Module running 11.1.
Having attempted the following
Solution
PROCESS:
Set a Default Gateway manually ( Reboot the UCM
Login to UCM using Manager and set a route to the router.
Error continues SSA UC module status is : "Application start fault". " UC module application failed to start on port 4"
I have also made multiple attempts in changing EnhTcpaService EnhTcpaPwd1 , Telephony (CSTA)and Directory (IP-Office)respectively.

I don't know what it is that I am missing or perhaps omitting?
All inputs and advise welcome.
 
backup your files (if any) and wipe and reinstall the OS on the uc module.

-Austin
I used to be an ACE. Now I'm just an Arse.
qrcode.png
 
Thanks AACon for the reply.
Will wipe and reinstall.[sad]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top