UC module V2 "insufficient disk space during upgrade" 2

[mic501]

Trying to upgrade this module using usb procedure. Towards version v11 SP2
Booting on the USB the installation starts and at the very start with Avaya logo I get this message:
There was an error running your transaction for the following reason(s): insufficient disk space.
The UC module is working fine running version 9.1, and according to system status the disk space is just 38% utilized.

Any ideas?

 

[RINGINnBLINGIN]

i'd take a backup and just reinstall it as opposed to upgrade. it's almost the same amount of time and far less than troubleshooting it. plus... clean install

 

[sizbut]

Upgrade from what? With which ISO file?

Stuck in a never ending cycle of file copying.

 

[RINGINnBLINGIN]

i meant take a good backup, reset it to default and simply install the software from scratch with a keyboard/monitor connected to it.

 

[mic501]

I have created a usb using avaya usb bootable creator as "upgrade" c110-11.0.4200.58
Now I see the message indicates also "you need more space on the following file systems: 0 M on var/log"
I am trying to see what is in there! Otherwise I will just fresh install

 

[RINGINnBLINGIN]

create it as "install".

 

[RINGINnBLINGIN]

you could root into it and clear the logs too if you really wanted to...

 

[mic501]

huh ok!
So the upgrade is useless?

 

[RINGINnBLINGIN]

just my opinion... but the amount of time spent trying to troubleshoot it isn't worth it. reloading it takes almost the same amount of time. plus... it's a clean install

 

[mic501]

You right..that's what I will try now!
Thanks guys.

 

[derfloh]

IIRC upgrade from 9 to 11 is not supported for UCM.

IP Office remote service
Fixed price SIP trunk configuration
CLI based call blocking
SCN fallback over PSTN

 

[sizbut]

Correct, need to go to 10.1 first using a USB and then you can go to 11.0 by any of the supported methods.

Stuck in a never ending cycle of file copying.