Two incoming calls gets intertwined in pbx

[swebigmac]

Still have a LOT of issues with my pbx even after 8.1 sp 10.

1) When a call i transferred from DECT to 9608 phone, all I get is local echo. Also, this may happen when answering a hunt Group call on the 9608. This happens when answering 30% of the calls. Only way to remedy is to Place the call on hold and then bring the call back.

2) Sometimes two phone calls can get intertwined in the pbx. If I call someone on the 9608, I can start hearing my colleauges phone call. MY party only hears what i'm saying, but I hear my colleauges other party.

Heeeeeelp

 

[swebigmac]

Error 1 happens a LOT, error 2 happens like 3-4 times per week. We get around 100 calls/day.

 

[Gunnaro]

I think you should try to build your config from scratch.

You posted the same problem earlier, and apparently non of our suggestions worked.

Kind regards

Gunnar
__________________________________________________________________
Hippos have bad eyesight, but considering their weight, it’s hardly their problem