Turning off Call-Fwd

[Joaquin1]

Can you turn off call-forwarding on a station with out having to walk to the set and punching in the FAC?

Thanks

 

[sezwhat]

You can program a brdg-app of the extension on a spare button on your phone, then punch in the FAC

 

[MERIDIAN11C]

try console permission COS and then the FAC
doing FAC and the extension that you want to fwd and then dial the destiny

 

[Joaquin1]

Thanks for the reply guys I'll give it a shot...Joaquin

 

[BoBAz]

You can set your station with console permissions and COS as MERIDIAN11C states, but if the system is a remote you can also use the remote access feature to do this, just ensure that you have a good barrier code established then set console permission and COS to the barrier code .. I do this constantly for that same reason.. people always forget what the FAC is or the leave on vacation and need it turned off...

Hope that helps

 

[MenaceEnnisII]

hi ,
busy out and release the station ( busy Ext. followed by release ext. ) set a different COR if you want to block Callfwd. and your done

 

[ack41]

'EUA (Extended User Administration)' Call Forwarding works great for us. We just implemented it. Here's how it works. Admin instructions at bottom...

To activate:
1. Dial *82 (hear dialtone)
2. Dial user extension number plus the pound(#) key (hear silence)
3. Dial user SSC number plus the pound(#) key (hear dialtone)
4. Dial forward to number (hear confirmation tone)

To deactivate:
1. Dial *83 (hear dialtone)
2. Dial user extension number plus the pound(#) key (hear silence)
3. Dial user SSC number plus the pound(#) key (hear confirmation tone)

Using EUA Call Forwarding from a Console Permissions Station or an Attendant.

To activate:
1. Dial *82 (hear dialtone)
2. Dial user extension (hear dialtone)
3. Dial forward to number (hear confirmation tone)

To deactivate:
1. Dial *83 (hear dialtone)
2. Dial user extension (hear confirmation tone)

To Admin:
ch sys cu - Enable Extended Admin FWD/CVG
ch fe - Assign FAC to Extended Admin
ch cos - Enable Extended FWD
ch tel - Assign Ext