Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TTI not working, what I´m missing...?

Status
Not open for further replies.

CarlosPrex

Vendor
Jun 5, 2003
95
MX
This Definity G3V6i.03.2.239.5 has

display system-parameters customer-options
Terminal Trans. Init. (TTI)? y

change system-parameters features
Terminal Translation Initialization (TTI) Enabled? y
TTI State: voice TTI Security Code: 1
Record PSA/TTI Transactions in History Log? y

change feature-access-codes
Terminal Translation Initialization Merge Code: *3 Separation Code: #3

So I´m trying to use TTI dialing *3+1+Extension, but just got an error tone.

Can anyone tell me if I´m missing something in order to make this feature work?

THANK YOU IN ADVANCE.
 
Only works if the extension's port is currently an X and the port you are trying to tti is unassigned.

-CL
 
Thank You.

In fact, I´ve tried the whole procedure in a proper way with this system, and only got an error tone. But what solved the problem was

- Removed all Port X stations

- Turn change system-parameters features
Terminal Translation Initialization (TTI) Enabled? n

- Save translations

- Turn change system-parameters features
Terminal Translation Initialization (TTI) Enabled? y

- Create stations with Port X

And it worked!
THANK YOU FOR YOUR SUPPORT ANYWAY.


 
you need to keep an eye on that, it could lead to the big c word. some tables may get corrupted.
 
I use 5 digits extensions so I use....

1 3 1 1 62173 to add an extension
1 3 2 1 62173 to remove a phone.

Joe
 
You might want to try using PSA instead, as this will log the phone off if its already logged on some where else.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top