TTI not working, what I´m missing...?

[CarlosPrex]

This Definity G3V6i.03.2.239.5 has

display system-parameters customer-options
Terminal Trans. Init. (TTI)? y

change system-parameters features
Terminal Translation Initialization (TTI) Enabled? y
TTI State: voice TTI Security Code: 1
Record PSA/TTI Transactions in History Log? y

change feature-access-codes
Terminal Translation Initialization Merge Code: *3 Separation Code: #3

So I´m trying to use TTI dialing *3+1+Extension, but just got an error tone.

Can anyone tell me if I´m missing something in order to make this feature work?

THANK YOU IN ADVANCE.

 

[rgtrgt]

it might be ttied already

 

[lopes1211]

Only works if the extension's port is currently an X and the port you are trying to tti is unassigned.

-CL

 

[CarlosPrex]

Thank You.

In fact, I´ve tried the whole procedure in a proper way with this system, and only got an error tone. But what solved the problem was

- Removed all Port X stations

- Turn change system-parameters features
Terminal Translation Initialization (TTI) Enabled? n

- Save translations

- Turn change system-parameters features
Terminal Translation Initialization (TTI) Enabled? y

- Create stations with Port X

And it worked!
THANK YOU FOR YOUR SUPPORT ANYWAY.

 

[rgtrgt]

you need to keep an eye on that, it could lead to the big c word. some tables may get corrupted.

 

[joegabe1974]

I use 5 digits extensions so I use....

1 3 1 1 62173 to add an extension
1 3 2 1 62173 to remove a phone.

Joe

 

[chilly1234]

You might want to try using PSA instead, as this will log the phone off if its already logged on some where else.