Trying to use XMOBILE to block an ANI 2

[telcomwork]

Basewd off thread thread690-543688 I configured an XMOBILE extension and set COR calling party restriction to origination but still call gets through. ANything else I need to focus on other than just setting up a geric XMOBILE extension?

Thanks!

 

[Shuck5]

How have you set your FRL? You should also set it in the COR to 0

 

[telcomwork]

I have set the FRL to block. I don't think I have it setup correct though. Basically I just added an XMobile extension and place the ANI in the cell filed and configured a COR to deny "origination" and set the FRL to 0. ANything else or basics I'm missing. I never used an XMobile extension.

 

[nohuhu]

telcomwork,

the easiest way to troubleshoot it is tracing. make another assignment to an ani you can control (your own cell phone, for example) and set up it the same as for blocked. then trace a new station that you've assigned to your cell phone, make some calls and see if a station is being associated with your cell phone ani. if it does, change off-pbx settings so all calls from your cell phone are being blocked and then duplicate resulting settings over this abusing ani.

 

[telcomwork]

Thank you. I try that. Thanks again!