Trouble deleting a trunk - SV7000

[phoneguy94]

I am trying to delete a route to assign it to a new LENS.
I can delete all the trunks except for TK1. When I try to delete it it says "Data is in use and can't be removed. (Error 0x0633)"

Does anyone know what that means and what I need to do in order to delete it?

I went into MBTK to make sure it was set to busy, I'm not sure what else to try.

Thanks

 

[belevedere]

What kind of trunk was it? Potts, PRI T-1 paging.
Check ACSI to see if it is DIT'd anywhere.

 

[phoneguy94]

Nothing set in ACSI.
The trunks were created for use with an MC4MG2 card. (Command: AMGIL)

 

[OzzieGeorge]

Have you tried doing a dconx to see what the system thinks it's doing? Also have you tried physically making the card busy? Also how about rlst?

 

[NECPBXtech30]

have you checked the indicator lights on the front of the box? When all else fails unplug the unit and try to delete.

"However beautiful the strategy, you should occasionally look at the results." Sir Winston Churchill